Filter
Top Products
52
Chapter 7, Configuring Your MXO2 System
Specifying your video output settings
This section specifies the video output settings for Matrox MXO2, MXO2 Rack,
and MXO2 LE. For MXO2 Mini, see “Specifying your video output settings
(MXO2 Mini)” on page 54.
MXO2 features simultaneous video outputs that allow you to send your video to
a variety of devices at the same time. MXO2 provides two separate video output
channels to choose from: main channel and SD channel. The video output
settings allow you to set the main channel’s video format, assign a video channel
to an MXO2 output, and define the channel’s behavior. You can also select other
settings such as the scrub and pause method, and calibrate your HDMI monitor
for video.
For a list of the supported video output formats for the MXO2 main and SD
channels, and the supported video formats for the MXO2 outputs, see Appendix
D, “Matrox MXO2 Supported Output Formats.”
1 From the Apple menu, click System Preferences, and then click the
Matrox MXO2 icon.
2 Click Video Output.
3 From the Set main channel format to menu, you can select the video
output format that you want for the MXO2 main channel. For a list of the
supported video output formats for the MXO2 main and SD channels, see
“Supported Main and SD video output formats” on page 124.
$ Follow application Sets the main channel’s video output to match your
project’s video output format, or to a compatible format for your project.