Filter
Top Products
3
Battery requirements and guidelines for MXO2
• For Matrox MAX H.264 encoding:
$ Apple Compressor v3.0.5 or later (required for Blu-ray Disc).
$ Apple QuickTime Pro v7.6 or later, Apple Final Cut Pro v6.0.5 or later,
Adobe After Effects CS4, Adobe Encore CS4, Apple Motion v3.0.2 or
later, Apple Qmaster v3.0.5 or later, Telestream Episode and Episode Pro
v5.3 or later, Media 100 Suite version 1.0 or later, or other
QuickTime-based video applications.
Check our website for equipment information
For up-to-date information about recommended computer systems, batteries, and
other MXO2-compatible devices, check the Matrox MXO2 Support section of
our website at www.matrox.com/video/support.
Battery requirements and guidelines for MXO2
¦NoteThis section does not apply to Matrox MXO2 Rack and Matrox MXO2
Mini as they cannot be powered by a battery.
As an alternative to using an AC outlet, you can use a battery to power Matrox
MXO2 or MXO2 LE. To avoid damage to your MXO2 system and peripheral
devices when using a battery, please observe the following requirements and
guidelines. For instructions on how to connect a battery, see “Powering MXO2”
on page 12 or “Powering MXO2 LE” on page 28.
• Use a standard self-protected (fused) battery with a nominal voltage of 12V,
13.2V, or 14.4V. A higher-voltage battery will damage your MXO2 system.
• Disconnect MXO2 from the battery when not in use. Do not leave MXO2
connected to the battery when not in use as this may damage your MXO2
system and/or battery.
• Do not power your MXO2 using your vehicle’s battery via the power socket.
²Caution To avoid damage to your MXO2 system and peripheral devices, use a
Matrox-recommended battery. For a list of batteries recommended for use with
your MXO2, visit the Matrox MXO2 Support section of our website at
www.matrox.com/video/support.