Filter
Top Products
3-53Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Using the Admin Tools
TCP/IP settings
This sets the network environment for viewing received faxes and e-mails on a
MFP-connected computer or when using the MFP as a printer.
NOTE: If the administrator is registered, you should log-in as an administrator to
access this setting.
1
Log-in to “OfficeBridge”.
2
Click [TCP/IP] on the “Admin Tools” tab.
The “TCP/IP Settings” screen will appear.
3
Configure the settings, then click [Save] to save the settings.
4
If you entered or changed the “DHCP Setting”, “IP Address”, “Subnet
Mask”, “HTTP Port No.”, “Client Port No.”, or “InfoMonitor Port No.”, reboot
the machine to activate the new settings. To reboot the machine, turn the
machine off and after three or more seconds, turn it back on.