Filter
Top Products
3-54 Using the Admin Tools
Item Description
NetBIOS Name Enter the NetBIOS name.
• A NetBIOS name can contain up to 15 alphanu-
meric characters and the “–” symbol with no blank
spaces.
• The NetBIOS name must be unique on the net-
work.
“Work Group Name” Enter the name of the workgroup to which your
machine belongs.
If there is not a workgroup on your network, create
a workgroup in Windows. A domain name cannot be
used as a workgroup name.
• If there is not a workgroup on your network, create
a new workgroup by typing a new name that con-
tains up to 15 characters. The name cannot include
symbols and blank spaces. The name can include
alphanumeric and the following symbols: ! @ # $ %
^ & ( ) – _ ` { } . ~
Consult with your network administrator before
creating a new workgroup.
• A domain name cannot be used as a workgroup
name.
• The NetBIOS name must be unique on the net-
work.
“DHCP Setting” If a DHCP server is installed on your network, select
“ON”.
After rebooting the machine, an IP address and
Subnet Mask will be automatically assigned by the
DHCP server. According to the DHCP server setting,
a primary gateway address and primary DNS server
address may be assigned as well.
If your network is not using DHCP, select “OFF”.
IMPORTANT: Once the DHCP server has assigned
the IP address to your machine, that IP address
MUST be reserved within the specific DHCP scope.
Failure to do so could result in failed operation when
the IP address lease expires.
“IP Address” Enter the IP address of your machine.
“Subnet Mask” Enter the IP address for the subnet mask.
“Gateway Address” Enter the IP address of the gateway.
“DNS Server
Address”
Enter the IP address of the DNS server.
“DNS Suffix” Enter the DNS suffix.
“WINS Address” Enter the IP address of the WINS server.
“HTTP Port No.” This sets the HTTP port number for connecting the
optional “OfficeBridge Expansion Kit” from your web
browser.
Normally, set to “80”.