Filter
Top Products
3-60 Using the Admin Tools
Item Description
“Attach File
Format”
Specifies whether the document is converted into a “PDF”,
“TIFF-S” or “TIFF” format when sending an e-mail.
• PDF
The document is converted into PDF format. However, a
PDF file can only be transmitted to an e-mail inbox.
• TIFF-S (ITU-T T.37 simple mode)
The document is converted into a TIFF format based on
T.37 simple mode. T.37 is an international standard for
Internet faxing. When a document is sent in simple mode
format, it can be received normally by other Internet fax
devices. However, all attached documents are converted to
A4 size and 200 dpi resolution.
• TIFF (ITU-T T.37 full mode)
The document is converted into a TIFF format and is sent
at the original document size and resolution selected dur-
ing scanning.
“TIFF Image Encoding Method” sets the image encoding
method for sending documents with “TIFF”. Select “MH”,
“MR”, “MMR”, or “JBIG”.
NOTE: This setting is effective only for an e-mail sending
from the PC. For the attached file format of an e-
mail sending from the machine, you can set it using
the machine’s control panel.
However, the “TIFF Image Encoding Method” setting
is effective for both e-mail sending from PC and e-
mail sending from machine.
“Insert Cover-
sheet (I-Fax)
or Subject/
Text (E-mail)”
Select whether to automatically attach the following pre-
set subject line and text message into an e-mail if it is sent
without these items filled in by the user.
Subject: E-mail Message
Text: This is an e-mail message.
Please see the file attached.
When “Insert text” is selected, you can also select whether to
add the sender information to the text.
The sender information can be stored in “SMTP/POP Server
Settings” dialog.
NOTE: This setting is effective only for an e-mail sending
from the PC.
However, “The sender information” setting is effec-
tive for both e-mail sending from PC and e-mail
sending from machine.