Chapter 1 Getting Started with Your 653X
653X User Manual 1-2 ni.com
Use Group 1 and 2 to:
• Generate or receive digital patterns and waveforms timed by a TTL
clock
• Transfer data between two devices using one of six configurable
handshaking protocols
• Acquire a digital pattern every time the state of a data line changes
What You Need to Get Started
To begin using your 653X device, you need the following:
❑
One or more of the following devices:
– AT-DIO-32HS
– DAQCard-6533 for PCMCIA
– PCI-6534
– PCI-DIO-32HS
– PXI-6533
– PXI-6534
– PCI or PXI-7030/6533 (RT Series DAQ device)
❑
653X User Manual
❑
NI-DAQ (for PC compatibles or Mac OS)
❑
Software environments supported by NI-DAQ (optional):
– LabVIEW (for Windows or Mac OS)
– LabVIEW Real-Time (LabVIEW RT)
– Measurement Studio (for Windows only)
– Virtual Bench
– Other supported compilers
❑
The appropriate signal connector
❑
The appropriate shielded or ribbon cable. Refer to Appendix C,
Connecting Signals with Accessories, for specific information about
cables that are compatible with your device.
❑ Your computer or PXI/CompactPCI chassis and controller