Filter
Top Products
Chapter 1 Getting Started with Your 653X
© National Instruments Corporation 1-9 653X User Manual
To create a virtual channel, or to learn about other capabilities of MAX,
read the MAX online help by selecting Help»Help Topics and select
NI-DAQ from the menu.
In Mac OS
To view and test current resource allocation:
1. Open the NI-DAQ Configuration Utility.
2. Select the device you want to configure.
3. Click the Configure button.
4. Press the Test Resources button to test hardware resources.
Warning
Do not configure the 653X resources in conflict with non-National Instruments
devices. For example, do not configure two devices to have the same base address.
Note
The PCI/PXI-7030/6533 configuration is similar to PCI/PXI-653X configuration
with a few exceptions. Refer to your PCI/PXI-7030
an
d LabVIEW RT User Manual for
specific configuration details.
Note
If you are using the AT-DIO-32HS device in a non-Plug and Play system, the device
automatically configures to a switchless DAQ device so it can work in the system.
Now that you have completed configuring your device, you can begin
setting up the device for use.