Filter
Top Products
Index
653X User Manual I-10 ni.com
pin assignments (figure), C-6
68-pin signal connections, C-2 to C-3
accessories (table), C-3
pin assignments (figure), C-2
change detection, 2-31
control signals (table), C-1
handshaking I/O, 2-10 to 2-11
optional equipment, C-7
pattern I/O, 2-23 to 2-24
signal descriptions (table), C-3 to C-5
static digital lines, 2-4
signal edge-based handshaking protocols
comparison of protocols
(table),3-4to3-5
leading-edge handshaking
protocol, 3-29 to 3-34
long-pulse handshaking
protocol, 3-35 to 3-40
trailing-edge handshaking
protocol, 3-25 to 3-28
types of protocols, 3-24
sink current, D-9
software installation, 1-5
software programming choices, 1-3 to 1-5
National Instruments application
software, 1-3 to 1-4
NI-DAQ driver software, 1-4 to 1-5
source current, D-9
specifications
bus interfaces, A-3
change detection, A-3
digital I/O, A-1 to A-2
environment, A-4toA-5
memory, A-2
pattern I/O, A-3
physical, A-4
power available at I/O connector, A-4
power requirement, A-4
triggers
RTSI triggers (PCI, PXI, AT), A-3
start and stop triggers, A-3
standard output, unstrobed I/O, 2-2
start and stop trigger
change detection, 2-28 to 2-29
pattern I/O, 2-20 to 2-21
trigger specifications, A-3
start trigger
change detection, 2-28
pattern I/O, 2-19
STARTTRIG<1..2> signal (table), C-1
startup sequence for handshaking I/O,
2-11 to 2-12
controlling line polarities, 2-12
initialization order, 2-11 to 2-12
static digital lines
configuring, 2-2 to 2-3
standard output, 2-2
wired-OR output, 2-2 to 2-3
connecting signals, 2-4
controlling and monitoring, 2-2 to 2-6
Port 4 lines (table), 2-4
programming unstrobed I/O, 2-4 to 2-6
control/timing lines as extra
unstrobed data lines, 2-5 to 2-6
flowcharts, 2-5
using control lines as extra unstrobed data
lines, 2-3 to 2-4
stop trigger. See also start and stop trigger.
change detection, 2-28
pattern I/O, 2-19 to 2-20
STOPTRIG<1..2> signal
connecting signals
change detection, 2-31
pattern I/O, 2-24
description (table), C-4
handshaking I/O and pattern I/O
(table), C-1
start and stop trigger
change detection, 2-28 to 2-29
pattern I/O, 2-20