Filter
Top Products
A-10 NEC PowerMate VT 300i Series Release Notes
When users install their own version of Windows 95, ULTRA DMA/33 does
not function without the addition of these files. These .INF files can be added to
a new install of Windows 95 by using the NEC OS Restore CD. This results in
full ULTRA DMA/33 support.
Determining IDE Device Compatibility
The new PIIX4 component contains a small change in the IDE interface. This
change to lower voltage levels on one signal has no effect on most of the IDE
hard drives on the market. A small number of older drives fail to function with
this new setting. If you have a concern about an older drive that you would like
to use with your PowerMate VT 300i Series system, NEC CSD Technical
Support Services can help you determine if there might be a problem.
New System Board Jumper Settings
The system board configuration label attached to the system chassis does not
contain a complete listing of jumper settings for this system. See the following
figure for updated jumper setup information.