Filter
Top Products
Disassembly and Reassembly 3-13
Removing the Celeron or Pentium III Processor Cartridge
A – Locking Lever C – Processor Cartridge
B – Universal Retention Mechanism
10.
Install the replacement processor cartridge (see “Installing the Celeron or
Pentium III Processor Cartridge” in the following subsection).
Installing the Celeron or Pentium III Processor Cartridge
Install the Celeron cartridge or the Pentium III processor cartridge in the
universal retention mechanism and system board as follows.
!
CAUTION
Before handling components, reduce static discharge by
touching the chassis.
1.
Remove the processor currently in the system (see “Removing the Celeron
or Pentium III Processor Cartridge” earlier in this section).
!
CAUTION
Using the wrong heat sink or no heat sink can damage the
processor, system board, or both. Ensure that the
replacement processor cartridge has the correct heat sink
(refer to the documentation that comes with the processor).
Do not use the heat sink from the removed processor
cartridge.
Additional installation information can be obtained from NEC
CSD (see Section 8, “NEC CSD Information Services” for
information on contacting NEC CSD).