Filter
Top Products
2-14 System Configuration
Advanced Menu - Advanced CMOS Setup
Menu Item Settings (default is bold)
Quiet Boot Enabled, Disabled
When Enabled, displays the NEC splash screen, with settings for
displaying POST or entering the BIOS setup.
S.M.A.R.T. for Hard
Disks
Disabled, Enabled
Select Enabled to use the Self Monitoring Analysis and Reporting
Technology (S.M.A.R.T.) for reporting server system information over
a network.
PS/2 Mouse Support Enabled, Disabled
Select Enabled to allow use of a PS/2 mouse.
CPU Serial Number Disabled, Enabled
Advanced Menu - Advanced Chipset Setup
Menu Item Settings (default is bold)
Graphics Aperture
Size
4 MB, 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB
Determines the effective size of the graphics aperture used in the
particular PAC configuration.
USB Keybd/Mouse
Legacy Support
Disabled, Enabled
Select Enabled to enable the BIOS USB functions for legacy keyboards
and mice.
Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
Power
Management/APM
Enabled, Disabled
The Enabled setting enables Power Management and Advanced Power
Management (APM).
Video Power Down
Mode
Disabled, Standby, Suspend
Specifies the power conserving state that the VESA VGA video
subsystem enters after a specified period of display inactivity has
expired.
Hard Disk Power
Down Mode
Disabled, Standby, Suspend
Specifies the power conserving state that the hard disk drive enters
after a specified period of inactivity has expired.
Standby Time Out
(Minutes)
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while in full power on
state before entering Standby state.