Filter
Top Products
3-24 Disassembly and Reassembly
4. Press down on the battery clip to release the battery from its socket.
Removing the Battery
A
– Battery
B
– Clip
5. Remove the battery and discard in accordance with the manufacturer’s
instructions.
!
WARNING
The battery can explode if it is incorrectly replaced or
improperly discarded. Use only the same battery or an
equivalent type recommended by the manufacturer when
replacing the battery.
Lithium acts as a catalyst when exposed to water and
causes spontaneous combustion on contact. Discard used
batteries according to the manufacturer’s instructions.
6. With the positive (+) side facing up, press the new battery into the socket.
7. Replace the left side cover (see “Replacing the Left Side Cover” earlier in
this section).
8. Connect external peripherals and power cables.
9. Run Setup to reconfigure system parameters (see Section 2, “System
Configuration”).