Filter
Top Products
2-16 System Configuration
Advanced Menu - PCI/Plug and Play Setup
Menu Item Settings (default is bold)
Plug and Play
Aware O/S
No for Win NT, Yes for Win 9x
Select Yes if the system’s operating system is Plug and Play compliant.
Primary Graphics
Adapter
PCI, AGP
Select AGP if the graphics board is AGP. Select PCI if the graphics
board is PCI.
PCI VGA Palette
Snoop
Disabled, Enabled
Set to Enabled if an ISA adapter board requires VGA palette snooping.
PCI IDE Bus
Master
Disabled, Enabled
Set to Enabled to specify that the IDE controller on the PCI local bus
includes a bus mastering device.
Advanced Menu - Peripheral Setup
Menu Item Settings (default is bold)
Onboard Sound
Chip
Disabled, Enabled
The Enabled setting allows use of onboard sound.
Onboard FDC Auto, Disabled, Enabled
Select Auto to automatically detect FDC devices.
Onboard Serial
Port A
Auto, Disabled, 3F8h, 2F8h, 3E8h, eE8h
Onboard Serial
Port B
Auto, Disabled, 3F8h, 2F8h, 3E8h, eE8h
IR I/O Pin Location
Select
SINB/SOUTB, IRRX/IRTX
Serial Port B Mode Normal, IrDA, ASK IR
Selecting Normal sets the port for normal use, not for IR use.
IR Duplex Mode N/A
IrDa Protocol N/A
Onboard Parallel
Port
Auto, Disabled, 378, 3BC
Select Auto to allow the BIOS to automatically assign the parallel port to
an available parallel port IRQ.
Parallel Port Mode Normal, Bi-Dir, EPP, ECP
Use this mode to choose the operating mode of the onboard parallel
port.
EPP Version Use this setting (1.7 or 1.9) to select the EPP version.