Filter
Top Products
3-10 Disassembly and Reassembly
Blank Panel and Metal Shield Removal
Remove the blank panel from the front panel and the metal shield covering the
accessible device bay as follows.
1. Remove the front panel (see “Front Panel Removal” earlier in this section).
2. Remove the blank panel from the selected slot in the front panel by pressing
the blank panel tabs and pushing the blank panel out.
Removing the Blank Panel
A
– Blank Panel Tabs
3. Remove the metal shield from the accessible bay on the front of the chassis.
(See the previous figure “Removing the Front Panel” for location of the
metal shield.)
Insert a screwdriver into one of the holes in the metal shield.
Twist the shield with the screwdriver until the shield comes loose.