Filter
Top Products
Disassembly and Reassembly 3-11
DIMM Module Removal
Remove a DIMM module from the system board as follows.
1. Remove the left side cover (see “Removing the Left Side Cover” earlier in
this section).
2. Locate the DIMM module sockets on the system board.
3. Eject the DIMM module by pressing the plastic clips at the outer edges of
the DIMM socket away from the module.
Removing a DIMM Module
A
– Plastic Clips
Processor Cartridge Removal/Replacing
The system board has a Slot 1 connector and a universal retention mechanism
for securing in place a Celeron, Pentium II, or Pentium III processor cartridge
(depending on system model).
To remove or replace a processor cartridge, refer to the appropriate procedure in
the following subsections:
“Removing the Celeron or Pentium III Processor Cartridge”
“Replacing the Celeron or Pentium III Processor Cartridge”
“Removing the Pentium II Processor Cartridge”
“Replacing the Pentium II Processor Cartridge.”