Filter
Top Products
Disassembly and Reassembly 3-7
Replacing the Right Side Cover
Replace the right side cover as follows.
1. Position the right side cover over the chassis, about a half-inch from the
front panel.
2. Align the tabs on the inside of the top of the cover with the tab slots on the
left side of the chassis.
3. Fit the flange along the bottom of the cover over the rail along the bottom
edge of the chassis.
Replacing the Right Side Cover
A
– Right Side Cover
D
– Tabs
B
– Flange
E
– Tab Slots
C
– Rail
4. Firmly press the cover against the chassis and slide the cover towards the
front of the chassis until it locks in place.
Note
:
If the right side cover does not slide all the way to
the front of the chassis, check that the cover tabs at the front
of the cover are properly inserted into their slots in the
chassis.
5. Replace the three previously removed screws.
6. Replace the left side cover as previously described.
7. Reconnect all external peripherals.
8. Plug in all power cables.