Filter
Top Products
26 OKIOFFICE 87 User’s Guide
Setting Language
Your MFP machine comes with two languages installed, which appear on
the display and in reports. Follow the instructions below to switch lan-
guages.
Tip:
Your dealer may be able to provide you with additional languages.
14:USER LANGUAGE
[ENG.] YES(
) NO(
)
++
SELECT
FUNCTION
+
YES
+
+
USER
PROG.
9/SPACE
1
1
GHI
4
1
Press the SELECT FUNCTION key.
2
Press the 9/USER PROG. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
3
Press
YES
. The display shows FUNCTION NO. [ ].
4
Using the numeric keypad, enter 14. This display shows USER
LANGUAGE.
5
Press
NO
to switch to the other installed language.
6
To accept the language change, press
YES
.
7
Press the SELECT FUNCTION key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone system used to
route internal calls. If you have to dial a prefix (access) number to get an
outside line, then your line is connected to a PBX.
If you are connecting your MFP machine to a PBX, follow the instructions
below. These setting changes allow your MFP machine to identify your
PBX’ outside line dial prefix digits in the numbers that you program or dial
in your MFP machine. After it dials the prefix digits, your MFP machine
waits until it sees that the outside line is available before dialing the rest
of the number.