Filter
Top Products
Advanced Operations 61
Initiating a Relay Broadcast
1
Load your documents.
2
Press the SELECT FUNCTION key.
3
Press the 4/RELAY INIT.-TX One-Touch key. The display shows
RELAY PASSWORD.
4
Using the numeric keypad, enter a password of up to 20 digits
which is the same as the relay keyword programmed into the relay
key station.
5
Press the START key. The display shows REMOTE LIST NO.
6
Using the numeric keypad, enter a number of up to 20 digits which
corresponds to a relay group programmed into the relay key station.
7
Press the START key. The display shows SELECT LOCATION.
8
Select the location of the relay key station. Refer to the instructions
below.
To Select Using Do This
A One-Touch key Press the One-Touch key.
An Auto Dial number Press the AUTO DIAL key, then enter the three digit
Auto Dial number on the numeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
9
Press the START key. Your MFP machine begins sending the fax.