Filter
Top Products
36 OKIOFFICE 87 User’s Guide
Programming Auto Dial Numbers
Your MFP machine has 100 Auto Dial numbers available for quick, three-
digit selection and dialing. For each auto dial number, you can enter a fax
number up to 32 digits long and a Location ID (name) up to 15 characters
long.
AUTO DIAL NO. [_ ]
ENTER 01-70
++
SELECT
FUNCTION
LOCATION
PROG.
8/
+
AUTO DIAL
1
Press the SELECT FUNCTION key.
2
Press the 8/LOCATION PROG. One-Touch key. The Display shows
LOCATION PROGRAMMING.
3
Press the AUTO DIAL key.
4
Using the numeric keypad, enter a 3-digit number (001-100) for the
Auto Dial number you want to program.
5
The display briefly shows NO=<FAX NO.>, ID=<LOCATION ID> (or
a previously programmed fax number and location).
6
After the display clears, enter the fax number. Refer to the instruc-
tions below.
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces SPACE One-Touch key
Enter hyphens HYPHEN key
Enter pauses (i.e., to wait for long 19/PAUSE key
distance or outside lines)
Add a switch from pulse to tone dialing key
for part of the call
Move the cursor to make connections.
YES
and
NO
7
Press the START key.
100