Filter
Top Products
Advanced Operations 55
7
Using the numeric keypad, enter the time on which you wish the
transmission to begin.
Tip:
Be sure to enter the time using the 24-hour clock (i.e., 8:00
a.m. would be entered as 08:00, and 8:00 p.m. would be entered as
20:00).
8
Press
YES
. The display shows SELECT LOCATIONS.
9
Select a location. Refer to the instructions below.
To Select Using Do This
A One-Touch key Press the One-Touch key.
An Auto Dial number Press the AUTO DIAL key, then enter the three digit
Auto Dial number on thenumeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
10
Press the START key to finish the programming.
Canceling a Delayed Transmission
To cancel a delayed transmission from the document feeder or from
memory before it has been sent, follow the instructions below.
1
Press the STOP key. The display shows COMMUNICATION CAN-
CEL.
2
Press
YES
. The display shows the Location ID of the delayed
transmission currently loaded in your MFP machine.
3
Press
YES
.
4
If the delayed transmission was a feeder transmission, press the
STOP key again to remove the document from the document
feeder.