Dial Directories 33
Dial Directories
Programming One-Touch Keys
Your MFP machine has ten One-Touch keys for rapid dialing. You can
store up to two fax numbers with 40 digits for each One-Touch key, a
main number and an alternate number, which is used if the main number
is busy. You can also enter a 15-character Location ID (name) for each
One-Touch key.
Tip:
To find One-Touch keys which are not yet registered, repeatedly
press the SEARCH key.
LOCATION PROGRAMMING
ENTER(SRCH,OT,A/D,#)
++
SELECT
FUNCTION
LOCATION
PROG.
8/
+
OT
1
~
10
1
Press the SELECT FUNCTION key.
2
Press the 8/LOCATION PROG. One-Touch key. The display shows
LOCATION PROGRAMMING.
3
Press a One-Touch key to program.
4
The display briefly shows NO=<FAX NO.>, ID=<LOCATION ID> (or
a previously programmed fax number and Location ID).
5
After the display clears, enter the main fax number. Refer to the
instructions below.
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces SPACE One-Touch key
Enter hyphens HYPHEN key
Enter pauses (i.e., to wait for long distance Pause key
or outside lines)
Add a switch from pulse to tone dialing for key
part of the call
Move the cursor to make corrections
YES
and
NO
6
Press the START key.