Oki 87 Printer User Manual


 
Basic Operations 47
No Toner Reception
If the user setting No. 22 (NO TONER MEM. RX) is set to ON and your
MFP machine is low on toner, it displays a TONER LOW, REPLACE
TONER CART. message, and begins receiving data into memory (rather
than risk printing an unreadable message). If your MFP machine has
received a message in memory because toner is low, MSG. IN MEMORY
appears on the display. To print out a message stored in memory when
toner is running low, follow the instructions below.
PRINT MEMORY MSG. ?
YES(
) NO( )
+
SELECT
FUNCTION
PRINT
OPERATION
2
1
Press the SELECT FUNCTION key.
2
Press the 2/PRINT OPERATION One-Touch key. The display
shows PRINT MEMORY MSG?
3
Press
YES
. The stored message begins printing.
Tip:
If a memory reception password has been set, you need to
enter your password.
Tip:
Even if you see a TONER LOW message on your MFP ma-
chine, you may be able to use the 2/PRINT OPERATION One-
Touch key to continue printing faxes, but the print quality cannot be
guaranteed. Replace your toner cartridge as soon as possible.
Canceling Messages Stored in Memory
It is also possible to erase messages received in memory without printing
them.
1
After you have followed the instructions to print out messages
stored in memory, the display shows MSG. IN MEMORY, PRINT-
ING.
2
To erase the message instead of printing it, press the STOP key.
The display shows CANCEL?
3
Press
YES
to erase the message from your MFP machine’s
memory.