Installation 27
Warning: Some PBX installations may require additional adjust-
ments to your MFP machine. If you continue to have
difficulty with fax communication after following these
steps, contact your dealer.
PBX LINE
[OFF] YES(
) NO(
)
+++
ABC
2
USER
PROG.
9/SPACE
SELECT
FUNCTION
YES YES
1
Press the SELECT FUNCTION key.
2
Press the 9/USER PROG. One-Touch key.
3
On the numeric keypad, press 2. The display shows 2:DIAL PA-
RAMETER.
4
Press
YES
until the display shows PBX LINE, [OFF].
5
Press
NO
. The display changes to PBX LINE, [ON].
6
Press
YES
until the display shows DIAL PREFIX, [OFF].
7
Press
NO
. The display changes to DIAL PREFIX, [ ] ENTER 4
DIGITS.
8
Using the numeric keypad, enter the number you normally dial from
your PBX to obtain an outside line.
9
Press
YES
.
10
Press the SELECT FUNCTION key to finish.
Tip:
Keep in mind that all of the outside telephone numbers you
program into your MFP machine must begin with your PBX’s dial
prefix.
Tip:
To later turn off the PBX LINE and DIAL PREFIX functions,
follow Steps 1-7 above. At Step 8, press the 9/SPACE One-Touch
key four times.