Filter
Top Products
72 OKIOFFICE 87 User’s Guide
Changing Your User Function Settings
FUNCTION NO.[_ ]
ENTER 01-34
++
SELECT
FUNCTION
USER
PROG.
9/SPACE
YES
1
Press the SELECT FUNCTION key.
2
Press the 9/USER PROG. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
3
Press
YES
. The display shows FUNCTION NO. [ ].
4
Using the numeric keypad, enter the 2-digit number of the function
you want to change. This display shows the name of the selected
function.
5
Repeatedly press
NO
until the setting you want appears in the
display.
Tip:
If you are changing your MFP machine’s TX MODE DEFAULT
settings, the new settings appears on the LEDs above the Transmit
Resolution/
YES
and the Type of Original/
NO
6
Press
YES
to confirm your selection. The name of the next
function setting appears in the display.
7
Press the SELECT FUNCTION key to finish.
Setting Your MFP Machine’s Distinctive Ring
To use Distinctive Ring:
• You must have your local telephone carrier’s Distinctive Ring service.
• Your unit must be in FAX or PC answer mode, and the PBX dial param-
eter must be set to off. Other modes—TEL, TEL/FAX, or TAD—override
Distinctive Ring.
• You must have a genuine OKI optional handset connected to your unit.
This feature may not work properly if you have a telephone other than a
genuine Oki optional handset connected to your MFP machine.
12:DISTINCTIVE RING
[OFF] YES(
) NO( )
++
SELECT
FUNCTION
+
+
USER
PROG.
9/SPACE
1
ABC
2
YES
1
Press the SELECT FUNCTION key.