Filter
Top Products
Programming 69
15 INCOMING RING: This function controls the telephone ringing
sound your MFP machine makes when a call comes in. When this
function is set to off, your MFP machine does not ring during incoming
calls. When set to on, your MFP machine only rings when set to
manual receive mode or RING RESPONSE is set to 5-20 seconds
(except 1 ring). When set to DRC, your MFP machine rings for each
incoming call with the same tone even if you have used function
setting 12 to turn the DISTINCTIVE RING on. Available settings are
on, off and DRC.
16 REMOTE RECEIVE: This function allows you to tell your MFP
machine to switch from telephone to fax mode to receive an incoming
fax. To use this function, use the keypad of the optional handset or of
an external telephone to enter the remote receive number you have
programmed into your MFP machine. Available settings are off, 00, 11,
22, 33, 44, 55, 66, 77, 88, 99, ** AND ##.
17 MEM./FEEDER SW.: This function controls how your MFP ma-
chine normally transmits fax messages (by scanning the document
into memory first, or by transmitting directly from the document
feeder). Available settings are memory and feeder.
Note:
See Function Setting 25, Instant Dial.
18 POWER SAVE MODE: Not used.
19 ECM FUNCTION: The error correction mode function helps your
MFP machine to improve communication in areas where telephone
line conditions are poor. Available settings are on and off.
20 REMOTE DIAGNOSIS: The remote diagnostics feature allows a
service person to remotely dial and service your MFP machine.
Available settings are on and off.
21 PC/FAX SWITCH: If this function is set to on, your MFP machine
automatically transfers received faxes directly to the PC (and does not
receive and print them itself). However, if you are experiencing a
problem with your PC, you can tell your MFP machine to receive and
print faxes locally by setting this function to off. Available settings are
on and off.