78 OKIOFFICE 87 User’s Guide
FLASH/EARTH/NORMAL: If your MFP machine is connected to a
PBX, this function tells your MFP machine about the type of PBX line
your MFP machine is connected to. Available settings are normal (N),
flash (F) and earth (E).
AUTO START: When this function is turned on, your MFP machine
automatically begins dialing as soon as you have selected a location
by pressing a One-Touch key or entering an Auto Dial code. You do
not have to press START. Available settings are on and off.
DIAL PREFIX: If your MFP machine is connected to a PBX, use this
function to tell your MFP machine what access number is used to
obtain an outside line from your PBX. You can enter up to 4 digits. See
Connecting to a PBX in the Installation section for instructions on
changing this setting.
Changing Your Dial Parameter Settings
2:DIAL PARAMETER
YES(
) NO( /1-8)
++
SELECT
FUNCTION
USER
PROG
9/SPACE
ABC
2
1
Press the SELECT FUNCTION key.
2
Press the 9/USER PROG. One-Touch key.
3
On the numeric keypad, press 2. The display shows 2:DIAL PA-
RAMETER.
4
Press
YES
until the display shows the dial parameter you want
to change.
5
Repeatedly press
NO
until the setting you want appears in the
display.
6
Press
YES
to confirm your selection. The name of the next dial
parameter setting appears in the display.
7
Press the SELECT FUNCTION key to finish.