Filter
Top Products
Advanced Operations 53
Advanced Operations
Sending a Fax at a Later Date and Time
The delayed transmission feature allows you to send documents at a
specified date and time, and frees you from the need to manually start
the transmission. You can program a transmission delay to occur at any
time on the day of your transmission, or at any time over the next three
days.
You can program your MFP machine to send one delayed fax at a time
either from the document feeder or from memory. Refer to the table
below to decide which method you want to use.
Delayed TX Feature/Limitation From Feeder From Memory
Number of locations One Multiple
Fax machine can be used for other
transmissions while a delayed fax
is waiting to be sent? No Yes
Sending a Delayed Fax from the Document Feeder
Note:
In order to send a delayed fax from the document feeder,
function 17: MEM./FEED S/W must be set to Feed and funtcion
25:INSTANT DIAL must be set to Off.
DELAYED TX DATE
[07/01] YES(
) NO (
)
+
SELECT
FUNCTION
DELAYD
TX
1
1
Load your documents.
2
Press the SELECT FUNCTION key.
3
Press the 1/DELAYED TX One-Touch key. The display shows
DELAYED TX and today’s date.
4
Press
NO
. The display shows DELAYED TX DATE or, if the
transmission is to occur on the same day, press
YES
and go to
Step 6.