Filter
Top Products
62 OKIOFFICE 87 User’s Guide
Sending Documents Requested by Another Fax Machine
(Polling Transmission)
When you normally send faxes, you load documents into your MFP
machine, select a location, and then press the START key to begin
sending the documents.
However, sometimes it is more useful to be able to simply load your
documents on your MFP machine and set it to wait for the receiving fax
machine to call and collect them. This is called setting your MFP machine
to be polled, or polling transmission.
Setting Your MFP Machine to be Polled
1
Load your documents.
2
Press the SELECT FUNCTION key.
3
Press the 5/POLLING One-Touch Key. The display shows BULLE-
TIN POLL.
4
For standard polling, press
NO
. The MFP machine begins
scanning the message into memory and completes the set up
process for the polling text.
For Bulletin Polling, press
YES
. The display shows PERSONAL
BOX NO. [ ]. Enter a mailbox number between 0 ~ 8.
Tip:
With Bulletin Polling, a text message is stored in memory until
you delete it. You can therefore conduct polling transmission as
many times as you want.
Also, when using a box number, the remote fax must also be
equipped with a box function. Set the box number to 0 for polling
without a box number.