Filter
Top Products
6
PC programs can be written on-screen in ladder-diagram form as well as in mne-
monic form. As the program is written, it is displayed on a display, making con-
firmation and modification quick and easy. Syntax checks may also be per-
formed on the programs before they are downloaded to the PC.
The SSS comes on 3.5” disks.
A computer running the SSS is connected to the C200HX/HG/HE PC via the Pe-
ripheral Port on the CPU Unit using the CQM1-CIF02 or CV500-CIF01 cable.
1-7 Available Manuals
The following table lists other manuals that may be required to program and/or
operate the C200HX/HG/HE PCs. Operation Manuals and/or Operation Guides
are also provided with individual Units and are required for wiring and other
specifications.
Name Cat. No. Contents
GPC Operation Manual W84 Programming procedures for the GPC
(Graphics Programming Console)
FIT Operation Manual W150 Programming procedures for using the FIT
(Factory Intelligent Terminal)
SYSMAC Support Software Operation Manuals W247/W248 Programming procedures for using the SSS
Data Access Console Operation Guide W173 Data area monitoring and data modification
procedures for the Data Access Console
Printer Interface Unit Operation Guide W107 Procedures for interfacing a PC to a printer
PROM Writer Operation Guide W155 Procedures for writing programs to EPROM chips
Floppy Disk Interface Unit Operation Guide W119 Procedures for interfacing PCs to floppy disk drives
Wired Remote I/O System Manual
(SYSMAC BUS)
W120 Information on building a Wired Remote I/O System
to enable remote I/O capability
Optical Remote I/O System Manual
(SYSMAC BUS)
W136 Information on building an Optical Remote I/O
System to enable remote I/O capability
PC Link System Manual W135 Information on building a PC Link System to
automatically transfer data between PCs
Host Link System Manual
(SYSMAC WAY)
W143 Information on building a Host Link System to
manage PCs from a ‘host’ computer
SYSMAC NET Link Unit Operation Manual W114 Information on building a SYSMAC NET Link
System and thus create an optical LAN integrating
PCs with computers and other peripheral devices
SYSMAC LINK System Manual W174 Information on building a SYSMAC LINK System to
enable automatic data transfer, programming, and
programmed data transfer between the PCs in the
System
High-speed Counter Unit Operation Manual W141 Information on High-speed Counter Unit
Position Control Unit Operation Manuals NC111: W137
NC112: W128
NC211: W166
Information on Position Control Unit
Analog I/O Units Operation Guide W127 Information on the C200H-AD001, C200H-DA001
Analog I/O Units
Analog Input Unit Operation Manual W229 Information on the C200H-AD002 Analog Input Unit
Temperature Sensor Unit Operation Guide W124 Information on Temperature Sensor Unit
ASCII Unit Operation Manual W165 Information on ASCII Unit
ID Sensor Unit Operation Guide W153 Information on ID Sensor Unit
Voice Unit Operation Manual W172 Information on Voice Unit
Fuzzy Logic Unit Operation Manual W208 Information on Fuzzy Logic Unit
Fuzzy Support Software Operation Manual W210 Information on the Fuzzy Support Software which
supports the Fuzzy Logic Units
Temperature Control Unit Operation Manual W225 Information on Temperature Control Unit
Heat/Cool Temperature Control Unit Operation
Manual
W240 Information on Heating and Cooling Temperature
Control Unit
Available Manuals Section 1-7