Filter
Top Products
Standard Models Appendix A
512
Optical Power Tester
Name Specifications Head Unit Model number Stan-
dards
Optical Power Tester (see note)
(provided with a connector
adapter, light source unit, small
SYSMAC NET:
CV500-SNT31
C200HS-SNT32
S3200-CAT200
2 (provided with
the Tester)
S3200-CAT2000
---
single-head plug, hard case,
and AC adapter)
SYSMAC LINK:
CV500-SLK11
C200HW-SLK13/14
CV1000H-SLK11
S3200-CAT270
2 (provided with
the Tester)
S3200-CAT2700
SYSMAC BUS:
C200H-RM001-PV1
C200H-RT001/RT002-P
C500-RM001-(P)V1
C500-RT001/RT002-(P)V1
S3200-CAT282
2 (provided with
the Tester)
S3200-CAT2820
SYSMAC NET:
S3200-LSU03-01E
C500-SNT31-V4
S3200-CAT320
2 (provided with
the Tester)
S3200-CAT3200
Note: There is no difference between the light source unit and connector adapter for the Head Unit and those for
the Optical Power Tester.
Head Unit
Name Specifications Model number Stan-
dards
Head Units (a set consisting of
light source unit and connector
adapter)
SYSMAC NET:
CV500-SNT31
C200HS-SNT32
S3200-CAT2002
---
(see note)
SYSMAC LINK:
CV500-SLK11
C200HW-SLK13/14
CV1000H-SLK11
S3200-CAT2702
SYSMAC BUS:
C500-RM001-(P)V1
C500-RT001/RT002-(P)V1
C200H-RM001-PV1
C200H-RT001/RT002-PV1
S3200-CAT2822
SYSMAC NET:
S3200-LSU03-01E
C500-SNT31-V4
S3200-CAT3202
Note: Use a proper Head Unit model for the optical module to be used. If two types of optical modules (unit type
and board type) are used, order an Optical Power Tester plus a proper Head Unit model.
Master Fiber Set
Name Specifications Model number Stan-
dards
Master Fiber Sets (1 m) S3200-CAT3202 (SYSMAC NET, NSB, NSU,
Bridge)
S3200-CAT3201 ---
S3200-CAT2002/CAT2702 (SYSMAC NET, SYS-
MAC LINK)
S3200-CAT2001H
S3200-CAT2822 (SYSMAC BUS) S3200-CAT2821
Note: 1. The Master Fiber Set is used in combination with the Optical Power Tester to check the optical levels of
optical fiber cables connected to optical fiber cable connectors.
2. Optical fiber cables must be prepared and connected by specialists.
3. The Optical Power Tester, Head Unit, Master Fiber set, and Optical Fiber Assembling Tool are required to
connect optical fiber cables.