Filter
Top Products
Appendix B
IBM ProPrinter X24 and IBM ProPrinter II Commands
Characters used in control functions appear in monospaced type. The table below
ex
p
lains some of the conventions used.
A pair of numbers separated by a slash ( / ) character indicates Column/Row notation. This
notation refers to the location of a character in a standard code table, such as ASCII.
(
exam
p
le: 1/B = 1B is the hex-code for Esca
p
e
)
S
p
aces a
pp
ear between characters in se
q
uence for clarit
y
; the
y
are not
p
art of the format.
At the begin of this chapter you will find a listing of the IBM ProPrinter Emulation
commands classified b
y
Hex Code and at the end a Hex - Decimal conversion table.
The followin
g
conventions are used in the command listin
g
s:
Conventions:
ESC
Esca
p
e
(
1/B
)
, introduces an esca
p
e se
q
uence
Pn
Numeric parameter, or number of units that specify a distance or
quantity pertaining to the escape sequence, control function or control
string. Accepted values are 0...9999, may be preceded by + or -.
If the parameter is in normal notation like "200" the programming in hex-
code is according to a ASCII table. ("200" = 32,30,30 in hex).
n1..n2..n3....nn
A series of parameters pertaining to the escape sequence, control
function or control strin
g
.
S
P
Is standin
g
for S
p
ace
(
hex 20
)
.
Note:
Some commands or parameter may be different for a specific
Printer t
y
pe
.
In that case it will be indicated by the
Printer name
to which printer a command or
parameter applies.
B-1