Filter
Top Products
App
endix B IBM ProPrinte
r
X24 and IBM ProPrinter II Commands
ESC 3
n
(
IBM ProPrinter II
)
Line Feed - n/216"
Hexadecimal code: 1B 33 n
n = 1 - 255
Sets the n/216" (0,1176 x
n mm) line feed.
This is the line feed recommended for graphic printing (BIM). If programmed to 24/216", it
ensures that the various lines in 8-needle graphic printing meet perfectly.
It remains valid until a new line feed command is received.
Note:
To obtain
p
recise line feeds, alwa
y
s use multi
p
les o
f
3 for
p
aramete
r
n.
ESC A
n
(
IBM ProPrinter X24
)
Line Feed - n/72" or n/60"
Hexadecimal code: 1B 41 n
n = 1 - 85
If the parameter
AGM : NO
has been selected in the SETUP,it sets the n/72" (0,3528 x n
mm) line feed; If the parameter
AGM : YES
has been selected in the SETUP ,it sets the
n/60"
(
0
,
432 x n mm
)
line feed.
It will only be executed when the command
ESC 2
is received. Until then, the current line
feed remains valid.
Note:
n = 0 does not chan
g
e the current line feed.
ESC A
n
(
IBM ProPrinter II
)
Line Feed - n/72"
Hexadecimal code: 1B 41 n
n = 1 - 85
Sets the n/72" (0,3528 x
n mm) line feed.
It will only be executed when the command
ESC 2
is received. Until then, the current line
feed remains valid.
Note:
n = 0 does not chan
g
e the current line feed.
B-9