Filter
Top Products
C-2
C.1 Command Index (By Code)
Note: Ignored in column FUNCTION means the command is treated as NOP, that means,
according to defined command format all bytes of this command are discarded.
COMMAND HEX VALUE FUNCTION
BEL 07 Beep
BS 08 Backspace
HT 09 Horizontal Tabulation
LF 0A Line feed
VT 0B Vertical Tabulation
FF 0C
Form feed for fanfold paper or eject paper
for cut sheet
CR 0D Carriage return
SO 0E Set double width (one line).
SI 0F Set condensed printing in western mode
DLE B 10 42 Soft reset
DC1 11 On line (Ignored)
DC2 12 Cancel condensed printing for ASCII
DC3 13 Off line (Ignored)
DC4 14 Reset double width for current line.
CAN 18 Cancel line buffer
ESC BEL n 1B 07 n Change current emulation
ESC SO 1B 0E Set double width (one line)
ESC SI 1B 0F Set condensed printing for ASCII
ESC EM n 1B 19 n Control paper loading/ejecting (Ignored)
ESC SP n 1B 20 n Adds extra space between each character
ESC ! n 1B 21 n Master select
ESC $ n1 n2 1B 24 n1 n2 Set absolute horizontal print position
ESC % n 1B 25 n Select user-defined set (invalid on PR)
ESC & 1B 26 Define user-defined characters (Ignored)
ESC ( - nL nH m d1
d2...d(nH*256+nL-2)
d(nH*256+nL-1)
1B 28 2D nL nH m
d1 d2...d
(nH*256+nL-2)
d(nH*256+nL-1)
Set/reset underline
ESC ( C nL nH mL
mH d1
d2...d(nH*256+nL-3)
d(nH*256+nL-2)
1B 28 43 nL nH mL
mH d1
d2...d(nH*256+nL-3)
d(nH*256+nL-2)
Set page length in defined unit