Filter
Top Products
App
endix B
IBM ProPrinte
r
X24
and IBM ProPrinter II Commands
ESC J
n
(
IBM ProPrinter X24
)
One
Line Feed of n/216" or n/180"
Hexadecimal code: 1B 4
A
n
n = 1 - 255
Prints the buffer and feeds the paper line feed.If the parameter
AGM : NO
has been
selected in the SETUP , the paper line feed by n/216"; If the parameter
AGM : YES
has
been selected in the SETUP
,
the
p
a
p
er line feed b
y
n/180".
It also executes a carriage return, if the parameter
LF + CR : YES
has been selected in
the SETUP.
The value of
n
must be a multiple of 3 (minimum line feed). In 8-needle graphic printing,
the value 24/216" ensures that the lines meet
p
erfectl
y
.
ESC J
n
(
IBM ProPrinter II
)
One
Line Feed of n/216"
Hexadecimal code: 1B 4
A
n
n = 1 - 255
Prints the buffer and feeds the paper by n/216". It also executes a carriage return, if the
p
aramete
r
LF + CR = YES
has been selected in the
SETUP
.
In 8-needle
g
ra
p
hic
p
rintin
g
, the value 24/216" ensures that the lines meet
p
erfectl
y
.
ESC
]
Line Feed Backward
Hexadecimal code: 1B 5D
Prints the current line and executes a line feed backward of a value determined by the
vertical s
p
acin
g
selected.
If the parameter
LF + CR = YES
has been selected from the Setup, the printing position is
set at the left mar
g
in.
ESC
[
c1 c2 t1 t2 n1 n
2
IBM ProPrinter X24 onl
y
Line Feed Value Modification
Hexadecimal code: 1B 5B 5C
c1 t2 n1 n
2
Modifies the values of codes ESC J and ESC 2 as n/ 216” or n/180”.
Parameters
c1, c2, t1, t2
and n1 have the following fixed decimal values: 4, 0, 0, 0, and 0.
Paramete
r
n
2
has the decimal value: 180 or 216.
B-10