Filter
Top Products
App
endix B
IBM ProPrinte
r
X24
and IBM ProPrinter II Commands
B.2.3
Line feed
•
ESC 0
:
Line feed = 1/8"
•
ESC 1
:
Line feed = 7/72"
•
ESC 2
:
Line feed = 1/6" or Activate ESC A n
•
ESC 3
n
:
Line feed = n/216" or n/180" (ProPrinter X24); n/216" (ProPrinter II)
•
ESC A
n
:
Line feed = n/72" or n/60 (ProPrinter X24); n/72" (ProPrinter II)
•
ESC J
n
:
One line feed of n/216" or n/180 (ProPrinter X24); n/216" (ProPrinter II)
•
ESC ]
:
Line feed backward
•
ESC [ \
c1 c2 t1 t2 n1 n2
:
Line feed Value Modification
(
ProPrinter X24
)
ESC 0
Line Feed - 1/8"
Hexadecimal code: 1B 30
Sets the 1/8" (3.175 mm) line feed.
Remains valid until a new line feed command is received.
ESC 1
Line Feed - 7/72"
Hexadecimal code: 1B 31
Sets the 7/72" (2,47 mm) line feed.
It remains valid until a new line feed command is received.
ESC 2
Line Feed = 1/6" or Activate ESC A
n
Hexadecimal code: 1B 32
Sets the line feed of the value according to
ESC A
n
, when it is followed by this command. It
remains valid until a new line feed command is received.
Line feed - 1/6":
Sent alone, it sets the 1/6" (4,23 mm) line feed. This is the line feed recommended for
alphanumeric texts and ensures that semi graphic characters meet perfectly.
ESC 3
n
(IBM ProPrinter X24)
Line Feed - n/216" or n/180
Hexadecimal code: 1B 33
n
n = 1 - 255
If the paramete
r
A
G
M
: NO
has been selected in the SETUP ,it sets the n/216"
(0,1176 x n mm) line feed; If the parameter
AGM : YES
has been selected in the SETUP
,it sets the n/180" (0,141 x n mm) line feed.
This is the line feed recommended for graphic printing (BIM). If programmed to 24/216", it
ensures that the various lines in 8-needle graphic printing meet perfectly.
It remains valid until a new line feed command is received.
To obtain precise line feeds, always use multiples of 3 for parameter
n
.
B-8