Filter
Top Products
Maintenance
4.1.3
Cleanin
g
Procedure
•
Thoroughly brush and vacuum all accessible areas to any paper flock and dust.
•
Clean the black platen’s surface, the transport rollers.
•
Clean also the rollers on the lower side of the Alignment Unit.
•
Clean the covers and operator panel with damp, lint-free cloth. Do not use some
cleaning solvents or excessive amount of water.
4.1.4
Install the Alignment
•
Mount the Ali
g
nment Unit. Execute the removin
g
p
rocedure in reverse se
q
uence.
A
ttention:
Take care that the foil (2) at the rear side of the Alignment Unit (1) will not be
dama
g
ed and is flat over the Print Bar
(
3
)
!
4.1.5
Install the Ribbon Cassette
•
Insert the Ribbon Cassette.
(see paragraph
1.5
)
•
Swivel down the Print Unit with the green print unit lift handle to its normal position.
•
Close the Top Cover.
•
Connect the Power Cord.
4-4