Filter
Top Products
App
endix B IBM ProPrinte
r
X24 and IBM ProPrinter II Commands
FF
Form Feed
Hexadecimal code: 0C
Prints the current line and advances the document to the next page. If the length of form is
not lon
g
enou
g
h
,
e
j
ects the form from the front feeder.
If the parameter
LF + CR = YES
has been selected from the Setup, the printing position is
set at the left mar
g
in.
HT
Horizontal Tabulation
Hexadecimal code : 09
Advances the print head to the next horizontal tabulation stop (defined using
ESC D
).
The default setting is one stop every 8 characters, beginning at position 9.
If the position of the next stop is beyond the right margin, the printer ignores the
command.
LF
Line Feed Forward
Hexadecimal code: 0
A
Prints the current line and executes a line feed of a value determined by the vertical
s
p
acin
g
selected.
If the parameter
LF + CR = YES
has been selected from the Setup, the printing position is
set at the left mar
g
in.
V
T
V
ertical Tabulation
Hexadecimal code: 0B
Moves the print head to the next vertical tabulation stop (set using
ESC B
).
If there is no vertical tabulation program or if the next tabulation stop lies outside the
predefined printing area, it executes a line feed only.
If the parameter
LF + CR = YES
has been set in the
SETUP
, a carriage return is also
executed.
B-5