Filter
Top Products
Confi
g
urin
g
the Printe
r
3.4.1
SELECT CURRENT MACRO
The printer stores up to three user settings in MACRO 1 up to MACRO 3.
Use the
[STOP
#
]
key to activate this function. The active macro is displayed first. Press
the
[COMPRESS
–
]
key until you find the macro for your application and selected it with
the
[STOP
#
]
key. The printer will save the selected macro immediately. After the
procedure the printer changes into the ON-LINE mode and will now work with the new
settin
g
s.
3.4.2
SELECT USER TO SETUP
With the module
SELECT USER TO SET UP
you have the choice between MACRO 1,
MACRO 2, and MACRO 3. Select the macro witch should be changed.
N
o
te:
If you have selected all new items
and have these confirmed with the
[STOP
]
key,
don
'
t forget to activate the module
SAVE PARAMETERS
.
3.4.3
CONFIGURE
The followin
g
items can be modified accordin
g
to the
C-650 Plus
N
o
te:
In the different emulations the items shown are not equal. The option’s which are
p
rinted in
bold
indicate the actual settin
g
.
CONFIGURE
Pa
r
ameter O
p
tion E
x
p
lanation Note
RESUME DEF
A
ULT V
A
LUE NO
YES
Select resume default
value or not,
If select YES, jump to
SAVE PARAMETERS the
parameters will be resumed
the default value if pressing
[STOP
] to confirm.
This option is mainly
used to resume the
default value when the
menu parameters
have been changed in
disorder.
INTERF
A
CE DU
A
L
INTERFACE
SERIAL1
CX
Select the interface you
w
ant to use.
DU
A
L or CX will be
selected only if an
optional interface card
is installed.
RS1 EMUL
A
TION IBM
LQ1600K
Selec
t
y
ou
r
RS1 emulation
3-6