Filter
Top Products
Gettin
g
Started
1.2
R
e
q
uirements to the Location of the Printe
r
Environmental Conditions
This printer is designed to be installed in a typical office environment. We claim that
customer must follow these operation explanation as below for printer’s well working
status and safet
y
of o
p
erator:
•
Install the printer in an area away from any heat source, air conditioner, or strong
airflow.
•
Avoid installing the printer where it is exposed to moisture or heat (eg. direct sunlight).
•
Avoid installing the printer in a dusty or humid environment.
•
Do not put printer to the high temperature, shake or wet environment. And no exposure
to direct sunlight. For example boiler, humidifier or fridge.
•
Position the Printer on a stable level surface.
Preconditions for Installation
•
Place the printer on the stand or a table.
•
When processing fanfold paper always place the printer with its front edge slightly off
the edge of the table.
Power Re
q
uirements
•
No special wiring is required. A typical office wall outlet is sufficient. Make sure that the
electrical wall outlet to which the printer is connected has a valid ground and that it is
able to supply the power needed by the machine.
•
Do not plug into the same wall outlet other equipment besides the printer such as
coffee machines, copy machines, or air conditioners.
1-2