Filter
Top Products
ACCULINK 336x E1 NTU
Index-4 December 1996 3360-A2-GB20-20
N
NET (Network) Configuration branch
example of use, 3-12
in the menu tree, A-1
option table, C-7
option worksheet, C-23
network interface
cabling example, 2-8
channel allocation procedure, 3-20–3-27
configuration options, C-7
failure message, 4-2
front panel LED indications, 3-5
functional description, 1-5, 2-1
physical description, 1-4
pin assignments, D-1
technical specifications, B-1
troubleshooting, 4-12
O
objects, SNMP, 1-2, E-1–E-19
OOF (Out Of Frame) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-3
front panel LED indication, 3-5, 3-6
Performance Report message, 4-8
troubleshooting, 4-12
options, strap. See configuration options
P
part numbers, H-1
pattern tests, 4-21–4-24
payload loopback (PLB), 4-17
PBX applications, 2-1
PDV (Pulse Density Violation) condition, 3-6
Perf (Performance Report) branch
example of use, 4-6–4-7
in the menu tree, A-1
performance reporting, 4-6–4-9, C-5, C-6
physical description of E1 NTU, 1-3–1-5, B-2
pin assignments, D-1–D-14
Point-to-Point Protocol (PPP)
procedure for configuring, 3-16
used with SNMP system, 1-2, 2-3, 2-4, 3-14, F-1
PORT (1–4) interface
channel allocation procedure, 3-20–3-27
configuration options, C-3–C-6
failure message, 4-2
front panel LED indications, 3-7
functional description, 1-5, 2-1
managed by SNMP, 1-2
physical description, 1-4
pin assignments, D-6
technical specifications, B-1
Port Configuration branch
example of use, 3-13–3-14
in the menu tree, A-1
option table, C-3–C-6
option worksheet, C-24
power input
cabling example, 2-8
connector, 1-4, 1-5, D-13
consumption, B-1
optional power sources, 2-5–2-7, B-1, D-13
requirement, B-1
troubleshooting, 4-12
power module, 1-5, B-1
power-up self-test
displaying results, 4-2
front panel indications, 2-9, 3-5
troubleshooting, 4-12
primary clock
configuration option, C-12
functional description, 3-33
procedure for configuring, 3-34
problem determination. See troubleshooting
protocol, link layer, 3-14, 3-16
Ptrns (Test Patterns) branch
example of use, 4-21–4-24
in the menu tree, A-1
Q
QRSS Test, 4-21
R
RAI (Remote Alarm Indication) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-4
front panel LED indication, 3-5, 3-6
Performance Report message, 4-9
troubleshooting, 4-12
rate
auxiliary port, C-15
communications port, C-14
external clock, C-12
synchronous data port, C-10
rear panel
connectors. See connectors, rear panel
physical description, 1-3–1-5
switch, 1-4, 1-5
Rel (Release) branch
example of use, 3-35–3-36
in the menu tree, A-1
remote loopback, 4-15
repeater loopback (RLB), 4-18–4-19
reset
front panel indications, 2-9
procedure, 3-36