Filter
Top Products
ACCULINK 336x E1 NTU
3-36 December 1996 3360-A2-GB20-20
3. From the Control screen, select Rel (Release).
F1
Control:
Rel LED ClrReg
F2
F3
The active user interface is released. A screen with
this message appears. No user interface is active
until input is received from a user interface.
F1
Ft. Panel:
Released
F2
F3
Resetting the E1 NTU
Use the Reset command to perform a power-on reset of
the E1 NTU.
To reset the E1 NTU,
1. From the top-level menu screen, press the
key
until the Ctrl selection appears on the screen.
F1
E1 HDSL NTU
Stat Test Cnfig
F2
F3
2. Select Ctrl.
F1
E1 HDSL NTU
Test Cnfig Ctrl
F2
F3
3. From the Control screen, press the key until
the Reset selection appears on the screen.
F1
Control:
Rel LED ClrReg
F2
F3
4. Select Reset.
F1
Control:
ClrReg Reset
F2
F3
5. From the Device Reset screen, press F1 to initiate
a reset of the E1 NTU (the power-up sequence
screen appears). Press F2 instead to return to the
Control screen without initiating a reset.
F1
Device Reset:
Yes No
F2
F3
Download Operations
NOTE
The Download command is for
use by service personnel only.
Loss of primary data could result
from improper use.