Filter
Top Products
ACCULINK 336x E1 NTU
C-6 December 1996 3360-A2-GB20-20
Table C-2
(4 of 4)
Port Configuration Options
Far-end: Disab
Next Disab Maint Prev
Far-End Performance Statistics. Specifies whether to monitor for far-end performance report messages (PRMs) and
maintain far-end performance registers for a particular port.
Disab – Disables far-end performance statistics.
Maint – Monitors the port’s EDL for PRMs and maintains far-end performance statistics.
NOTE: This configuration option is only available on 2-port and 4-port E1 NTUs.
NOTE: This configuration option is not available if EDL is disabled.
NOTE: If the local E1 NTU is configured to maintain far-end performance statistics, then the remote device must be
configured to send near-end performance statistics.
Mgmt Link: Disab
Next Disab SNMP Prev
EDL Management Link. Specifies whether the EDL management link is enabled for a particular port. Selecting SNMP
allows SNMP management traffic to flow over the 4 kbps in-band data link provided by EDL.
Disab – Disables the port’s EDL management link.
SNMP – Enables the port’s EDL management link.
NOTE: This configuration option is only available on 2-port and 4-port E1 NTUs.
NOTE: This configuration option is not available if EDL is disabled or FDL is enabled for SNMP.
NOTE: If the local E1 NTU’s EDL is enabled, then the remote device’s EDL must also be enabled.