Filter
Top Products
Configuration Options
C-113360-A2-GB20-20 December 1996
Table C-5
(3 of 3)
Data Port Channel Configuration Options
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 ... N31
Next – – – – – – – – – – – – ... Prev
OR
D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 ... D31
Next – – – – – – – – – – – -– ... Prev
Data Port Channel Allocation (appears for the individual channel method only). Designates the DS0 channel to allocate to
this port (N1–N31 for the network interface and D1–D31 for the G.703 DTE interface).
Line 1 displays the 31 channels for the network interface or the G.703 DTE interface. Line 2 displays what is allocated to
the DS0 channel indicated in Line 1. Possible values for Line 2 are:
Value Meaning
– This DS0 channel is not allocated. You can modify this value on this screen.
Prt
n
This DS0 channel is allocated to port
n,
where
n
is a number from 1 to 4. You can modify this value
on this screen for this port only.
N
n
This DS0 channel is allocated to the network interface DS0 channel
n
, where
n
is a number from
1 to 31. You cannot modify this value on this screen.
D
n
This DS0 channel is allocated to the G.703 DTE interface DS0 channel
n
, where
n
is a number
from 1 to 31. You can modify this value on this screen.
Select the channel by pressing the Function key under that number. To deallocate a port, press the Function key under
that port number. Pressing the Function key under channels assigned to other ports has no effect.
NOTE: The E1 NTU automatically derives the data rate for the port from the number of DS0 channels allocated.
NOTE: If time-slot 16 is reserved for signaling , D16 automatically connects to N16 and cannot be changed from this
screen.
NOTE: For the 3364 NTU there is a hardware limitation that limits the combined bandwidth used by Port 1 and Port 3 to
a total of 2048 kbps and the combined bandwidth used by Port 2 and Port 4 to 2048 kbps. If a selection of Prt
n
causes this limit to be exceeded, the selection is ignored and the “–” will continue to be displayed for the
channel.