Filter
Top Products
3 – Event Messages
Alarm Events
59060-05 A 3-5
A
(A1003.0010) (Segmenting, zoneset zone_set_name not defined)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. The zone set is not
found within the local zoning data base while interop mode is
disabled.
Action: Contact your authorized maintenance provider.
(A1003.0011) (Segmenting, zoneset zone_set_name already active)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. A switch tried to
activate a zone set that is already active while interop mode is
disabled.
Action: Contact your authorized maintenance provider.
(A1003.0012) (Segmenting, zoneset zone_set_name merge conflict)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two zone sets were discovered in the
local zoning database with the same name, but different
membership.
Action: Contact your authorized maintenance provider.
(A1003.0013) (Segmenting, zone zone_name merge conflict)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two zone were discovered in the local
zoning database with the same name, but different membership.
Action: Contact your authorized maintenance provider.
(A1003.0014) (Segmenting, alias alias_name merge conflict)
Meaning: There is a conflict in the zoning configuration causing the
Inter-Switch Link (ISL) to isolate. Two aliases with the same name
but different membership were discovered in the local zoning
database.
Action: Reconcile the active zone sets so that the two aliases have
identical membership.
(A1003.0015) (Zoneset Activation received from switch with domain domain_ID failed,
unknown zoneset zone_set_name)
Meaning: A zone set activation received from the named switch failed
because the zone set was not in the zoning database.
Action: Examine the named switch to verify that the zoning database is
correct.