Q-Logic FIRMWARE VERSION 7.4 Switch User Manual


 
3 – Event Messages
Alarm Events
59060-05 A 3-19
A
(A1004.0038) (WorldWide Name (WWN) device_WWN assigned domain domain_ID, fabric
binding indicates this domain is reserved for device_WWN.)
Meaning: The user-activated fabric binding conflicts with the current domain
ID assignment.
Action: Change the domain ID of the device.
(A1004.0039) (WorldWide Name (WWN) device_WWN currently in fabric, no fabric binding
in active security set for this WWN.)
Meaning: Fabric binding failed due to security incompatibility.
Action: Check the security settings of the named device.
(A1004.003F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not
allowed to join fabric.)
Meaning: The switch with the specified WWN is not allowed to join the fabric.
Action: Add the switch to a group in the active security set.
(A1004.0040) (World Wide Name (WWN) device_WWN assigned domain domain_ID, fabric
binding indicates it should use domain_ID.)
Meaning: A fabric binding configuration was activated that conflicts with the
current domain ID assignment.
Action: Change the domain ID of the named device, and then reconfigure
the fabric.
(A1004.0041) (Eport isolating due to E_Port License Exceeded.)
Meaning: An E_Port isolated because all licensed E_Ports are in use.
Action: Obtain a license key to license additional E_Ports.
(A1004.0043) (Forcing Domain ID change due to Interoperability setting from
old_domain_ID to new_domain_ID.)
Meaning: The Domain ID of the switch is changed due to an interoperability
configuration change. The old Domain ID does not conform to the
range of allowed Domain IDs for the new interoperability setting.
Action: None
(A1004.0048) (Eport Isolating due to Port Binding failure)
Meaning: A switch device attempted to login as an Inter-Switch Link (ISL),
but that device was not configured in the port binding list.
Action: Add the device to the port binding list.