Filter
Top Products
3 – Event Messages
Alarm Events
3-10 59060-05 A
S
(A1003.0038) (Merge failed, Total zones in zonesets limit would be exceeded.)
Meaning: A fabric merge failed because the total number of zones in zone
sets exceeds the zoning database limit.
Action: Remove zones either from the local switch or the remote switch so
that the combined sum is less than the zones-in-zone sets limit.
(A1003.0039) (Merge failed, total zone limit would be exceeded.)
Meaning: A fabric merge failed because the total number of zones exceeds
the zoning database limit.
Action: Remove zones either from the local switch or the remote switch so
that the combined sum is less than maximum zone limit.
(A1003.003A) (Zone Merge conflict for ZoneSet zone_set_name (Zone mismatch for zone=
zone_name, check type or members), ISOLATING)
Meaning: A fabric merge failed because two zones of the same name in two
zone sets of the same name have different membership.
Action: Reconcile the membership in the two zones so that they are the
same.
(A1003.003B) (Incomplete merge request sequence received, unable to process request.)
Meaning: A remote switch sent a merge request that was not understood.
Action: Check the remote switch for configuration errors or equipment
malfunction.
(A1003.003C) (Incompatible Zoning mode, Isolating link)
Meaning: The fabric contains switches with a mix of interoperability mode
settings.
Action: Configure all switches in the fabric to have the same value for
interoperability mode.
(A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action
to be brought online.)
Meaning: When deactivating a security set, ports that were previously
downed due to security violations remain down.
Action: Reset the ports or place the ports online.
(A1003.003F) (ISL group empty and links up. Set ports offline to activate.)
Meaning: An attempt to activate fabric binding with an ISL group that has no
members is not allowed because there are inter-switch links (ISL)
logged in to the switch.
Action: Configure all ISLs offline or add each ISL member with fabric
binding information to the ISL group before activating.