3 – Event Messages
Critical Events
3-58 59060-05 A
S
(C) (8700.0012) (Eport) (Port: port_number) (Connection failure, fabric limited to two
switches)
Meaning: The switch cannot be connected to the fabric due to a license
restriction.
(C) (8700.0013) (Connection failure, fabric limited to two switches)
Meaning: The switch cannot be connected to the fabric due to license
restriction.
(C) (8B00.0005) (Unable to test profile profile because the CallHome service is disabled)
Meaning: The test of the named profile failed because the Call Home service
is disabled.
(C) (8B00.0006) (Unable to test profile because the CallHome service is disabled)
Meaning: The test of the named profile failed because the Simple Mail
Transfer Protocol (SMTP) server IP addresses are the factory
defaults or the servers are disabled in the Call Home service
configuration.
(C) (8B00.0007) (Unable to test profile profile because the FromEmailAddress has not been
configured in the CallHome setup)
Meaning: The test of the named profile failed because the
FromEmailAddress was not specified in the Call Home service
configuration.
(C) (8B00.0008) (Unable to test profile profile because the CallHome service is updating
configuration)
Meaning: The profile cannot be tested while the Call Home service
configuration is being updated.
(C) (8B00.0009) (Unable to send test result for profile profile)
Meaning: The pass or fail notification for the test could not be sent to the
requestor.
(C) (8B00.000A) (Unable to provide profile processing information, the CallHome service
is updating configuration)
Meaning: Profile status information is not available while the Call Home
service configuration is being updated.
(C) (8B00.000B) (Unable to change SMTP servers because the CallHome service is
updating configuration)
Meaning: You cannot change the active Simple Mail Transfer Protocol
(SMTP) server while updating the Call Home service configuration.