Filter
Top Products
3 – Event Messages
Alarm Events
3-8 59060-05 A
S
(A1003.002A) (No response received from switch with domain ID domain_ID)
Meaning: A Staged Fabric Configuration (SFC) frame was sent to the switch
given by domain_ID, but a response was not received.
Action: Check the status of the remote switch at the given domain ID.
There could be an issue with the security configuration or the
zoning configuration.
(A1003.002B) (No response received from switch with domain ID domain_ID)
Meaning: A Update Fabric Configuration (UFC) frame was sent to the switch
given by domain_ID, but a response was not received.
Action: Check the status of the switch.
(A1003.002C) (Zone Merge response indicates failure due to zoning limits, Isolating link)
Meaning: Response from other switch indicates that the active zone sets
could not be merged.
Action: Edit or delete the conflicting zone objects or deactivate the zone
set on the remote switch.
(A1003.002D) (Zone Merge response indicates failure to merge, Isolating link)
Meaning: The attempt to merge two fabrics failed because each active zone
set contained a zone with the same name, but different
membership.
Action: Edit the affected zone to remove the conflict or deactivate one of
the zone sets.
(A1003.002F) (SW2 Zoning Not Supported by other switch, Isolating link)
Meaning: The inter-switch link isolated because the local switch is configured
for FC-SW-2-compliant zoning (interoperability mode set to
Standard), but the remote switch is not.
Action: Set the interoperability mode on the remote switch to Standard.
(A1003.002E) (Zoning merge has been rejected.)
Meaning: The attempt to merge two fabrics failed because the active zone
sets each contained a zone with the same name, but different
membership.
Action: Either edit the affected zone to remove the conflict, or deactivate
one of the zone sets.
(A1003.0030) (Zone Merge rejected by remote switch.)
Meaning: The zone merge failed.
Action: See the switch log for more details on why the merge failed.