Filter
Top Products
3 – Event Messages
Alarm Events
3-22 59060-05 A
S
(A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended
credit not granted for port: port_number)
Meaning: Loop ports cannot borrow credits from the credit pool.
Action: Change the port type to G_Port or F_Port.
(A1005.0013) (Hotswap procedure failed - must hardreset switch)
Meaning: The blade hot-swap procedure failed or the procedure was not
followed correctly.
Action: Perform a hard reset.
(A1005.0020) (Warning - development logging is enabled)
Meaning: Development logging is enabled.
Action: Contact your authorized maintenance provider.
3(A1005.0024) (Switch must be reset after leaving the Diagnostics Admin State)
Meaning: After changing the switch administrative state from Diagnostics to
any other state, the switch must be reset to complete the state
change.
Action: Reset the switch.
(A1005.0034) (System resource error - contact technical support)
Meaning: There is a system resources problem on the switch.
Action: Contact technical support.
(A1005.0035) (System resource error - contact technical support)
Meaning: There is an internal problem on the switch.
Action: Contact technical support.
(A1005.0036) (Hotswap procedure failed before last reset - must hardreset switch)
Meaning: The blade hotswap procedure failed and the switch was reset
without a power-on self test.
Meaning: Reset the switch with a hard reset.
(A1005.0037) (Hotswap procedure never completed - the blade will not be functional until
the switch is hardreset)
Meaning: The blade hot-swap procedure was not completed.
Action: Reset the switch with a hard reset.
(A1005.0038) (Switch incompatibility error - contact technical support)
Meaning: Switch incompatibility error.
Action: Contact technical support.