Filter
Top Products
3 – Event Messages
Alarm Events
3-34 59060-05 A
S
(A1007.000E) (Security: Auth challenge received from WWN port_WWN, not Authorized to
join)
Meaning: A challenge authentication frame was received from a remote
switch, but the local switch does not have an entry for itself within
the active security set ISL group.
Action: Edit the ISL group to include the local switch.
(A1007.000F) (Security: Chap session Gen Response indicates error, chap unable to
authenticate)
Meaning: An Authentication Response frame cannot be built because the
Challenge Handshake Authentication Protocol (CHAP) session is
not in the right state. The port will isolate.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if the device belongs in the fabric.
(A1007.0010) (Security: Chap session Receive Challenge indicates bad state, chap unable
to authenticate)
Meaning: The Challenge Handshake Authentication Protocol (CHAP)
session state is not in the correct state for a challenge message.
The port will isolate.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if the device belongs in the fabric.
(A1007.0011) (Chap failure, isolating with Invalid Attach)
Meaning: Frame does not match format for a Challenge Handshake
Authentication Protocol (CHAP) status frame. Ports will isolate.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if it belongs in the fabric.
(A1007.0012) (Port with World Wide Name (WWN) port_WWN address FC_address not
authorized to login, verify MS security configuration)
Meaning: The port cannot login with the current security configuration.
Action: Add the named port to the Management Server group in the active
security set.